Novel ionic liquid improves efficiency and stability in perovskite solar cells
Researchers from Purdue University, University of Kentucky, National Renewable Energy Laboratory (NREL) and Lawrence Berkeley National Laboratory have developed a perovskite solar cell approach that uses a tailored ionic liquid, methoxyethoxymethyl-1-methylimidazole chloride (MEM-MIM-Cl), to improve both efficiency and operational stability.
MEM-MIM-Cl contains an ethylene glycol ether side chain that controls perovskite crystallization and stabilizes buried interfaces through specific interactions with NiOx, a commonly used hole transport layer.
During film formation, MEM-MIM-Cl induces a distinct intermediate perovskite phase via chelation with undercoordinated Pb(II) ions, lowering defect density and limiting defect-driven degradation pathways under light, heat and moisture. This molecular-level regulation of crystal growth and interface chemistry reduces trap formation and slows key degradation reactions that normally limit device lifetime.
The resulting perovskite solar cells reach a power conversion efficiency of 25.9% while maintaining 90% of their initial performance after 1,500 hours of continuous one-sun illumination at 90 °C, which exceeds earlier stability results obtained under less demanding conditions. Under diurnal cyclic ageing tests that mimic day–night operation, the devices show strong fatigue resistance, consistent with the combined bulk passivation and interface stabilization provided by MEM-MIM-Cl.
The ionic liquid also improves film uniformity and densification, suppressing pinholes and grain-boundary pathways for moisture and oxygen ingress, which further contributes to reduced non-radiative recombination and better charge transport. Because MEM-MIM-Cl can be incorporated through standard solution processing without major changes to existing fabrication workflows, the strategy is compatible with scalable perovskite module manufacturing lines.
Beyond this specific formulation, the work outlines design principles for using ionic liquids as crystallization regulators and interface modifiers in halide perovskite devices. These principles can guide the development of additional ionic liquids tuned for different perovskite compositions and device architectures, with potential relevance to other perovskite-based optoelectronic technologies.